Views: 0 Author: Site Editor Publish Time: 2023-03-24 Origin: Site
The swimming pool glass mosaichas a good decorative effect, so many people will choose the swimming pool glass mosaic, so how to paste the swimming pool glass mosaic? Let's take a look at the introduction of the swimming pool glass mosaic with Foshan Ralart Mosaic Co., Ltd.
Here is the content list:
The swimming pool glass mosaic is one of the oldest known decorative arts.
How to paste swimming pool glass mosaic?
One of the oldest known ornamental trades, glass mosaics are patterns created using small penstocks or crockery pieces. In ultramodern times, swimming pool glass mosaic is further a type of ceramic pipe. It's a kind of slip-up with a special way of actuality. Generally, it's composed of dozens of small bricks to form a fairly large slip-up. It's extensively used in inner small area bottoms, walls, and out-of-door large and small walls and bottoms due to its small size and various features. Due to its small size, the swimming pool glass mosaic can make some mystifications to produce grade goods.
1. Brush the glue
Brushing cement is the key to laying the swimming pool glass mosaic well. Prepare strong pipe cement mixed in proportion, and apply the pipe cement on the wall with a troweling cutter. Be careful not to apply too important. First spread the cement on the wall, and also use a smooth trouncing cutter to spread the cement unevenly. Generally, the consistency of the cement is about 20 mm. Note that the stirred mosaic tenacious mortar should be used up within 2- 3 hours according to rainfall conditions.
2. Tiling
After brushing the glue, align the swimming pool glass mosaic with the gap according to the drawing, and use a plastering knife or putty shovel to stick the mosaic tightly, or use a flat plank on the surface of the mosaic, and tap it evenly with a rubber hammer to ensure that the paste is firm. Since each small piece of mosaic is fixed with a mesh, after it is attached to the wall, the glue penetrates each small mesh to achieve a fixed effect.
3. Check the paving
After paving a certain range of mosaics, check the paving situation. First of all, the gap between the bricks must be determined as a uniform width, so it is necessary to use a small ash shovel to adjust the ash joints. This is a process that requires the most patience in the process of laying mosaics, and it is also the process of laying and pasting is the most important part. In addition, the paved swimming pool glass mosaic is checked and filled, and the small pieces of mosaic that have been dropped are filled.
4. Pointing
After the inspection is completed, after the moisture is moderately dried and the initial strength is obtained, the jointing should be started. Prepare the required grout, and pour the grout into the gap of the swimming pool glass mosaic with a plastering knife. Note that the area of each scraping should not exceed 2 square meters. The caulk is evenly applied to the surface of the swimming pool glass mosaic to ensure that all grout joints are filled and there is no excess residue. When pointing, please use a damp cloth to gently dry the caulk on the mosaic surface within 20-25 minutes after caulking.
For further information, please continue to follow https//www.ralartmosaic.com/.