English
Views: 0 Author: Site Editor Publish Time: 2023-02-14 Origin: Site
A mosaic mural is one of the oldest known decorative arts and it is a pattern created using small tiles or small ceramic tiles. In modern times, a mosaic mural is more of a type of tile, which is a special way of existing, generally consisting of dozens of small pieces of tiles to form a relatively large tile. It is widely used for small indoor floors and walls and large and small outdoor walls and floors with its small size and colorful features. Due to their small size, the mosaic mural can make some murals and produce gradient effects.
Here is the content:
Mosaic tile wall tiling method
Mosaic tile wall paving skills
(1) Grass-roots treatment: the use of a fixed combination of steel formwork cast-in-place concrete surface of the mosaic mural, smooth and flat, to attach a release agent, easy to paste the occurrence of the drum off, available 10% concentration of alkali solution brushing, and then with 1: cement mortar scraping 2 ~ 3mm thick putty gray once. To increase the bonding force, the putty ash can be mixed with 3% 5% emulsion of cement mass or 107 rubber.
(2) Middle layer treatment: middle layer plastering must have a certain strength, and not with a soft bottom paving. Because the mosaic mural for the wall uses the clapperboard pat pressure to catch the seam, if the middle layer without strength, will cause the surface is not flat.
(3) Mixing mortar: combined with the layer of cement paste water-cement ratio of 0.32 is better. But the construction is possible to centralize modulation, but with manual mixing at the work surface by hand, its water-cement ratio has easy control.
(4) The mosaic mural for the wall should fit right into the picture frame and should be inserted into the window frame a little. Joints are made with cement mortar, and the joints cannot exceed the picture frame if the brocade tile is higher than the window frame. There will be gaps.
1, Check the construction of materials: before construction, carefully pack boxes of the mosaic mural, to see if there are enough mosaics to complete the work, in the top of each box, we will show the product model, color number, production batch number, and other details.
2, Swinging wall foundation: this step is the foundation of the wall swinging, swinging the wall must be smooth and the same color.
3, Scribe: scribe lines on the wall to mark the exact location of each paste mosaic mural. Will be 3 paste mosaics on the ground side by side, so that the paste and paste between the gray seam and a paste in the same gray seam, measure the overall width. Then use a straightedge and level to measure the size of the vertical and horizontal drawing on the wall to become a large square. Then divide the large square into 9 squares, each square put 1 paste mosaic mural.
Foshan Ralart Mosaic Co., Ltd. was established in 2011, after more than a decade of development, with excellent quality, unique products, and world-class service. We have become a leading and reputable mosaic mural for a wall supplier in Foshan, China.
