The Construction Method of Swimming Pool Glass Mosaic

I believe everyone is very familiar with the construction method of swimming pool glass mosaic, and it shows itself in front of us with its unique advantages. With ever-changing collocations, it has received the love of many young friends. There may be many renovation owners who do not know how to paste the swimming pool glass mosaic and the construction method of the swimming pool glass mosaic. Then Foshan Ralart Mosaic Co., Ltd. will introduce the construction method of swimming pool glass mosaic in detail.

Here is the content list:

• Preliminary preparation for the construction of the swimming pool glass mosaic.

• Construction operations of swimming pool glass mosaic.

Preliminary preparation for the construction of the swimming pool glass mosaic.

According to the design requirements of the swimming pool glass mosaic on the exterior wall, the specific operation method of each part is determined, and the specific construction area is measured to calculate the specific quantity of the required materials. Before the formal construction, inspect the swimming pool glass mosaic that needs to be laid, and select the swimming pool glass mosaic with inconsistent specifications, inconsistent colors, and flawed surface patterns, and do not use it. The swimming pool glass mosaics that will be paved on the same part of the pattern are classified separately so that the later construction operations can be carried out smoothly.

Construction operations of swimming pool glass mosaic.

First, the basic treatment of swimming pool glass mosaic construction. Thoroughly clean the wall, then moisten the wall with water, and apply the bottom grout. Generally, three layers are applied, and one layer is slightly thicker than the first layer. Gradually increase between 5 and 10mm, and also carry out watering maintenance. Second, pre-arrange the swimming pool glass mosaic grid line, according to the color sample requirements of the design drawings, and paste the mosaic of the same classification and specification on the same part of the wall, the arrangement of bricks should start from the inner corner and stop at the outer corner. If there is no design for the drip line, the bricks on the front of the waistline of the outer wall should protrude downward, and the bricks at the bottom of the line should be finned inward to facilitate dripping. Line up the pattern boundaries.

Third, after the foundation ash is finally set, water it again and moisten it, apply the cement paste to the parts to be tiled, and use a wooden trowel to hit the cement paste to a uniform thickness (the thickness is preferably 1-2mm). Apply the white cement paste to the seams of the clean glass mosaic on the surface, and then stick it to the wall. Fourth, after the swimming pool glass mosaic firmly adheres, use a brush to drench the paper on the surface of the mosaic, and then remove the paper. Fifth, clean up the residual paper wool after peeling off the paper and the cement that was squeezed out of the seam when pasting. You can use a brush and clean water to properly scrub and fill the seam with white cement. Then use cotton gauze or cloth to wipe the brick surface until no residue is left.

The above is the relevant content about the construction method of swimming pool glass mosaic, I hope it can be helpful to everyone! If you are interested in our products or have other needs, please feel free to contact us, our official website is https://www.ralartmosaic.com/.